First, the principle
When conveyed horizontally, the material particles are pushed by the chain in the moving direction. When the internal friction between the material layers is greater than the external friction between the material and the pipe wall, the material moves forward with the chain to form a stable material flow; when vertically conveyed, the material particles in the pipe are pushed upward by the chain because the lower part Feeding prevents the upper material from sliding down and generates lateral lateral pressure, so the internal friction of the material is enhanced. When the internal friction between the materials is greater than the friction between the material and the inner and outer wall of the pipe and the weight of the material, the material is transported upward with the chain. A continuous stream is formed.
Advantages of the pipe chain conveyor system
1.Compact structure, small footprint, can change the conveying direction in three dimensions.
2. Fully enclosed conveying, no dust leakage, and no dust collector is required at the outlet. Can be filled with gas when conveying materials
3. The material is smoothly conveyed along the pipe, the material is less damaged, and the slow curved conveyance causes few material particles to generate debris.
4, the lowest energy consumption-the most economical operating cost, the entire system is driven by only one motor.
5, no system blockage-suitable for conveying a variety of materials.
The equipment: environmental protection, low energy consumption, raw material dust does not fly, and the operating environment is clean. The safety is high, the pipeline is not cluttered, is not affected by any terrain, angle and height, and the raw materials will not be jammed. Large conveying capacity and conveying distance: the single unit has a maximum horizontal conveying distance of 60 meters, a vertical maximum lifting height of 40 meters, and a power of 0.2-11 kilowatts.
Material selection of components (determined according to customer's actual use requirements)
1. The driving wheel, passive wheel box, pipes, flanges, etc. are all selected 304. This material is a common material for chemical fiber equipment and can fully meet the requirements for use.
2. Selection of driving shaft and passive shaft.
3. The sprocket is 301.
4. Select 301 for the chain.
5. Material board (commonly known as scraper) uses modified polymer, which has excellent wear resistance and no pollution to raw materials. At the same time, users' production costs can be reduced.
6. The chain conveyor controls the inverter, over-current protection, daily silo material level interlocking, fault alarm and other control methods.
Fine chemicals: pigments, dyes, coatings, carbon black, titanium dioxide, iron oxide, ceramic powder, heavy calcium, light calcium, bentonite, molecular sieves, kaolin, silica gel powder, activated carbon, etc.
Pesticide ore: urea, ammonium chloride, ammonium bicarbonate, soda powder, solid pesticide, tungsten powder, pesticide auxiliary, copper concentrate powder, coal powder, phosphate rock powder, alumina powder, etc.
Building materials: cement, clay, yellow sand, quartz sand, clay powder, silica, limestone powder, dolomite powder, wood powder, glass fiber, silicon dioxide, talc powder, etc.
Food industry: flour, starch, cereals, milk powder, food additives, etc.