The pipe chain conveyor is the same as the transmission chain. The precision conveyor chain is also composed of a series of bearings. They are fixed by a chain plate with a restraining effect. Each bearing of the pipe chain conveyor includes a pin and a sleeve on which the rollers of the chain rotate.
Both the pin and the sleeve are case-hardened, which allows them to be hinged together under high pressure, and can withstand the load pressure transmitted by the roller and the impact during meshing.
Conveyor chains of tube chain conveyors of various strengths have a range of different chain pitches: smaller chain pitches depend on the requirements of the sprocket teeth for sufficient strength, while larger chain pitches are usually made by chain plates and general The rigidity of the chain is determined. If necessary, the sleeve between the link plates can be strengthened to exceed the rated larger chain pitch, but it is necessary to retain the gap between the teeth to clear the sleeve.
In industrial chains, conveyor chains are a very common type of chain. From the assembly line to the food industry, conveyor chains are everywhere, and the damage of conveyor chains is also very common, and the wear of conveyor chains is caused by their fatigue. The long-term use and wear of the chain will cause the chain to fail and affect the work efficiency. Is it necessary to replace the new chain directly when molding and conveying the chain?
This allows you to reverse the chain and continue to use it with the slightly worn side. Adding lubricating oil to the conveyor chain regularly can also reduce its wear. In general, the failure of the conveyor chain is mainly caused by the extensive wear of the chain due to prolonged use.