The pipe chain conveyor is a continuous conveying equipment for conveying bulk materials such as powder, small granules and small blocks. In a closed pipe, the chain piece is used as the transmission member to move the animal material along the pipe. When conveyed horizontally, the material particles are pushed by the chain in the moving direction. When the internal friction between the material layers is greater than the external friction between the material and the pipe wall, the material moves forward with the chain to form a stable material flow; when it is transported vertically, the material particles in the pipe are pushed upward by the chain because the lower part Feeding prevents the upper material from sliding down and generates lateral lateral pressure, so the internal friction of the material is enhanced. When the internal friction between the materials is greater than the friction between the material and the inner and outer wall of the pipe and the weight of the material, the material is transported upward with the chain. A continuous stream is formed.
The modern pipe chain conveyor system has higher requirements for dust protection. To this end, there are water spray and dust collection devices at each transition of the chain pipe conveyor, and windshields or wind shields will be provided along the pipe chain conveyor. The board and system are composed of single machines. For the operators and repairers working in the whole machine system, they must not only base themselves on the single machines in charge, but also understand the interconnections between the systems. The single machine is composed of many components. Only by doing the daily maintenance of each component to make it in a good working condition can we ensure the safe operation of the equipment;
We generally use the pipe chain conveyor in different places, working environment, technical performance and different types of materials to meet a variety of operating conditions, in addition to the more commonly used universal pipe chain conveyor, but also There are a variety of new-type pipe chain conveyors, the most representative of which are: large-inclined belt conveyors, deep groove belt conveyors and pressure belt conveyors, tubular belt conveyors, air cushion belt conveyors, flat turning belt conveyors, and wire Friction, wave-shaped conveyor belt conveyors, etc., there are many classification methods for refinement
Several key points for maintenance of pipe chain conveyors: cleaning, tightening, adjusting, lubricating and anti-corrosion. In the ordinary production process, each machine maintainer should do according to the maintenance manual and maintenance procedures of Ruitian Machinery's environmental protection pipe chain conveyor, strictly perform various maintenance tasks within the prescribed cycle, reduce the wear rate of parts, and eliminate Hidden troubles to extend the life of the machine.
Maintenance is divided into: routine maintenance, regular maintenance (points: first-level maintenance, second-level maintenance, third-level maintenance), special maintenance (points: seasonal change maintenance, decommissioning maintenance).
Routine maintenance is centered on cleaning, lubrication, inspection and tightening. Routine maintenance is required during and after work.
The first-level maintenance work is carried out on the basis of routine maintenance. The main work content is to lubricate, tighten and check the relevant parts and their cleaning work.
The secondary maintenance work focuses on inspection and adjustment. Specifically check the engine, clutch, transmission, transmission components, steering and brake components.
The three-level maintenance focus is to detect, adjust, eliminate hidden troubles and balance the wear of various components. It is necessary to carry out diagnostic testing and conditional inspection on the parts that affect the performance of the device and the parts that have symptoms of failure, and then complete the necessary replacement, adjustment and troubleshooting.
Seasonal maintenance refers to that the packaging equipment should focus on the detection and repair of components such as the combustion system, hydraulic system, cooling system and starting system before the summer and winter. And now is the seasonal maintenance period of environmental protection pipe chain conveyor.