Drive roller: The drive roller is the key component of the belt conveyor to convey power, and is composed of rollers, bearing blocks and bearings. Drive device: The drive device is the power part of the belt conveyor, which is composed of a motor mounted on a rack, a coupling, Reducer, coupling, brake, etc.
Support rollers: Support rollers are used to support the conveyor belt and the materials carried on the conveyor belt, and to ensure the stable operation of the conveyor belt. The types of support rollers are grooved rollers, equal rollers, self-aligning rollers, buffer rollers, and return rollers. , Transition rollers, comb rollers and spiral rollers.
Tensioning device: The tensioning device is to make the conveyor belt have sufficient tension, and the conflict between the conveyor belt and the driving roller occurs.
Prevent the conveyor belt from slipping, and limit the sag of the conveyor belt between the rollers, so that the conveyor can run normally.
Reorientation drum: Reorientation drum is used to modify the operation target of the conveyor belt or to increase the wrapping angle between the conveyor belt and the drive roller. Frame: The frame is a device that supports the roller and the tension with the conveyor belt. Sweeper: Sweeper is used to sweep Material stuck on the conveyor belt.
Safety guard device: The safety guard device is a device that can monitor and alarm when there is an obstacle in the labor of the conveyor, including conveyor deviation monitoring, slippage monitoring, and crisis stop pull rope switches along the line.